51, Ezra street ground floor Kolkata – 700001
Get a Quote

Instrumentation Cable

Instrumentation Cable

Home // Instrumentation Cable

Instrumentation Cable Supplier

Instrumentation Cable Supplier

The company Narayani Electric is An Instrumentation Cables is designed with multiple conveyors that are used to transmit low-energy electric signals. The three main goals of an instrumentation connection are to measure, direct, and control the electrical framework and its various assistant cycles. These Instrumental Cables carry low-energy flags that enable the coordination or following of high-stakes electronic circuit-subordinate capacities. As a result, Instrumentation Cables play a critical role in the processing and assembly of tasks such as developing enterprises and power distribution systems. Narayani Electric, a leading Instrumentation Cable Supplier in Kolkata, West Bengal, Bihar, Odisha, Jharkhand, Chattishgarh & all over India, offers a variety of high quality cables for various applications.

These cables are accessible according to their development for example Development: Cores/Pairs/Triads/Quads. These Core/Pair/Triad/Quad are gathered in concentric or unit Formation with reasonable Lay Length. We, at Narayani Electric cables guarantee cautious and intensive endeavors in supporting principles and stringently implemented process control during improvement and assembling.

For further information, please contact our specialists at our cell number, who would be happy to provide you with more thorough information to meet your needs. We at Narayani Electric are widely regarded as the best in the industry, and we put our competition to shame in terms of quality and pricing! We have repeatedly demonstrated that we are superior to the finest!

Narayani Electric is one of the best Instrumentation Cable manufacturer, Instrumentation Cable exporter, Instrumentation Cable supplier in India. We serve in all over countries. If you want this product then please quote here !

Instrumentation Cable supplier

CONDUCTOR :

Annealed bare/ uniform coated with Tinned/Silver Platted, High Conductivity, and Electrolytic Grade Solid/Stranded/Flexible Conductor.

INSULATION :

Conductor are insulated with General Purpose PE / HR / FRLS / LSZH / PVC Compound / or any other dielectric material as per customers specification.

COLOUR OF DIELECTRIC :

Cores are identified with different type of color scheme as per requirement as below:-

  • As per IS:1554[Pt-I]:88, 694:90.
  • As Per IEC, ITD or number Printing.
  • As Per Customers Scheme.


PAIR/TRIAD/QUAD :

Two/Three/Four cores are uniformly twisted together to form a Pair/Triad/Quad with maximum lay length 80 mm/as per requirement of customer. The lay shall be so chosen as to minimize cross talk in the cable.

INDIVIDUAL SHIELDING :

If required, Individual Shielding may be of Poly Aluminum [Thin Layer of Aluminum Foil bonded to Polyester Film] Tape with Annealed Tinned Copper Drain Wire. It prevents the shorting of adjacent shield and minimizes the cross talk and ground loops. A Tinned Copper drain Wire is installed to provide continuous contact with the shield and allow to connection to ground. Tinning the drain wire reduces galvanic corrosion between drain and shield.

LAYING OF PAIRS/TRIAD/QUAD :

Pair/Triad/Quad are laid up with suitable lay. The outer most layers are right hand lay and successive layers are laid up with opposite lay. Then, a Polyster Tape is provided to bind up laid up Pair/Triad/Quad.

OVERALL SHIELDING :

Overall shielding can be made of Annealed Tinned Copper Braiding / Poly Aluminum [Thin Layer of Aluminum Foil linked to Polyester Film] Tape with Annealed Tinned Copper Drain Wire if necessary. ATC Shield Braiding has a high tensile strength and provides superior coverage in flexing applications. They are less difficult to end. This provides good shielding, reducing cross talk and noise to an absolute minimum.

INNER SHEATH :

The laid up pair/triad/quad after shielding are provided with an inner sheath, which may be either Extruded Inner Sheath or wrap with PVC Tape.

ARMOURING :

It is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips.

OUTER SHEATH :

It is applied over Armouring in case of Armoured Cable or over Inner Sheath in case of Unarmoured Cable. The Color of Sheath is Black or Grey. The Sheath material may be General Purpose/HR / FRLS / LSZH PVC Compound as per requirement of specification.

TYPICAL APPLICATION :

For Connection of Instruments, Process Control Systems, Computers, Data Transmission etc.

Quick links